BodyGuard Pro CB (Clear Back)® Forest Green Camo

BodyGuard Pro CB (Clear Back)® Forest Green Camo
[lcbgpcbfg]

Availability: In stock

The LensCoat® BodyGuard® Pro CB (Clear Back) is a camera body cover made from soft shock-absorbing neoprene, protecting your camera from the nicks, dings and scratches of accidental impact WHILE YOUR LENS IS ATTACHED. Like the BodyGuard Pro it also keeps the camera body free from dust and dirt as well as protects it from the elements AND it REDUCES SHUTTER NOISE. The BodyGuard Pro CB has a clear plastic back allowing you to use the camera with the cover on. Most buttons and switches can be accessed through the thin plastic back. The BodyGuard Pro CB also has finger access slits on the side for additional access to buttons and switches. The shutter button can easily be depressed through the neoprene or by sliding you finger under the cover. The BodyGuard Pro CB goes on and off easily allowing you to change batteries and memory cards quick and easy and has access for flash and camera straps.

Designed to slide over pro camera bodies such as:

Canon 1D, 1Ds, 1D Mark II, 1D Mark IIN, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV

Nikon D1, D1H, D1X, D2H, D2Hx, D2Xs, D3, D3s D3x

Designed to fit prosumer bodies with the optional body grip installed:

Canon 10D 20D 20Da 30D, 40D, 50D Digital Rebel/XT/XTi (300D/350D/400D), 5D 7D

Nikon D40 D40x D50 D70 D70s D80 D90 D100 D200 D300 D300s D700

Also fits SLR bodies with extended power winders approximately 6.25"w x6.5"h x 3"d. The BodyGuard can accommodate cameras with L-brackets mounted.

The BodyGuard is available in Black, Forest Green, Realtree Max4 , Realtree Snow, and Digital Camo.

$49.50
Select Quantity
   Pin it
The LensCoat® BodyGuard® Pro CB (Clear Back) is a camera body cover made from soft shock-absorbing neoprene, protecting your camera from the nicks, dings and scratches of accidental impact WHILE YOUR LENS IS ATTACHED. Like the BodyGuard Pro it also keeps the camera body free from dust and dirt as well as protects it from the elements AND it REDUCES SHUTTER NOISE. The BodyGuard Pro CB has a clear plastic back allowing you to use the camera with the cover on. Most buttons and switches can be accessed through the thin plastic back. The BodyGuard Pro CB also has finger access slits on the side for additional access to buttons and switches. The shutter button can easily be depressed through the neoprene or by sliding you finger under the cover. The BodyGuard Pro CB goes on and off easily allowing you to change batteries and memory cards quick and easy and has access for flash and camera straps.

Designed to slide over pro camera bodies such as:

Canon 1D, 1Ds, 1D Mark II, 1D Mark IIN, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV

Nikon D1, D1H, D1X, D2H, D2Hx, D2Xs, D3, D3s D3x

Designed to fit prosumer bodies with the optional body grip installed:

Canon 10D 20D 20Da 30D, 40D, 50D Digital Rebel/XT/XTi (300D/350D/400D), 5D 7D

Nikon D40 D40x D50 D70 D70s D80 D90 D100 D200 D300 D300s D700

Also fits SLR bodies with extended power winders approximately 6.25"w x6.5"h x 3"d. The BodyGuard can accommodate cameras with L-brackets mounted.

The BodyGuard is available in Black, Forest Green, Realtree Max4 , Realtree Snow, and Digital Camo.

BodyGuard Pro CB (Clear Back)® Forest Green Camo
[lcbgpcbfg]
by MEUNIER Jean François Date Added: Friday 01 January, 2010
excuse me for my english ! the body guard is very nice and very goode for the wildlife photography

Rating: 5 of 5 Stars! [5 of 5 Stars!]
by Fred A. Lewis Date Added: Sunday 20 December, 2009
Fantastic Product with a Dual Purpose.... Not only does the CB do a great job insuring my bodies aren't affected excess moisture or dust but in difficult shooting situations they also provide a noticeable amount of noise dampening for my Nikon D3's... Everybody knows that the D3's shutter can be a little noisy when shooting quiet events and the Body Guard Pro CB does a decent job in helping to muffle the noise so that it doesn't sound so sharp and thus doesn't travel as far... I posted a sound bite on my site if you want to hear the actual difference - D3 w AF-S 17-35 ED lens ( my go-to event lens ).. you'll be able to tell which one is the bit with the CB installed... recorded with my MacBook Pro built in mike @ about 1.5 ~ 2 meters.... http://www.ktmjapan.com/tmp/D3_LensCoat_2meters.mp3 Don't get me wrong it's not a sound blimp but it does make enough difference for me when on noise critical shoots... Highly Recommended..

Rating: 5 of 5 Stars! [5 of 5 Stars!]
by Alessandro Tiraboschi Date Added: Thursday 17 December, 2009
Excellent construction and finishing details, the neoprene thickness is ideal. Excellent screen transparent for both clear vision for the material it is constructed. Access to the commands of the machine is slightly awkward, but usable. My personal suggestion is to work to create a model that improves the more the acoustic sound of the shooting. I use a Canon Eos 1D Mark III body, for photographing animals, shooting is very noisy and I like to have a BodyGuard Pro that would alleviate most of the noise to avoid startling the subject. Alessandro..

Rating: 4 of 5 Stars! [4 of 5 Stars!]
by Graham Coull Date Added: Thursday 26 November, 2009
An exellent product, good protection and some shutter sound deadning.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
by Odd Kindberg Date Added: Wednesday 11 November, 2009
I liked the bodyguard, butI would like to have å clear field on the top. I prefer to be able to see the top camera display on my Canon EOS 1 MkIII...

Rating: 4 of 5 Stars! [4 of 5 Stars!]
by CARE Andréane Date Added: Wednesday 16 September, 2009
This product is of very good quality, is easy to use and reduced the noise of the shutter release, which is important for the photographing on sensitive ground as the animal photo. It also allows to protect the camera body from the humidity/moisture...

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Displaying 13 to 18 (of 25 reviews) Result Pages:    1  2  3  4  5   
Write Review