LensCoat® RainCoat 2 Pro Realtree Max4

LensCoat® RainCoat 2 Pro Realtree Max4
[lcrc2pm4]

Availability: In stock

LensCoat® RainCoat 2 provides protection for your camera and lens from the elements like rain, snow, salt spray, dirt, sand and dust while allowing you easy access to the camera and lens controls. It has all same great features as the original RainCoat but adds an additional integrated pocket with foldaway arm sleeve on the left side for easier access to zoom and focus. The RainCoat 2 comes in two sizes Pro (for DSLRs with lenses from 200-400/300mm 2.8 - 800mm) and Standard (for DSLRs with small lenses up to 100-400/400mm f5.6). The RainCoat 2 is constructed from a lightweight waterproof, breathable poly tricot material. Available in Black, Green, Navy, Realtree® Max4, Realtree AP Snow, Digital Camo, and Forest Green camouflage pattern. The seams are tape sealed for maximum protection.

NO dedicated eyepiece required.

The RainCoat 2 goes on quickly and easily. Its versatility through the use of the cinch straps allows you to adjust the length of the cover and to keep it snug around your lens. It has 2 fold out arm sleeves from its integrated pockets for access to the camera and lens controls. You can also access the camera through the rear opening and the lens through the hook & loop bottom closure.

Features-

  • Lightweight waterproof, breathable poly tricot material
  • Super quiet
  • No slip rubber around hood section for solid grip on hood (no bungee cord)
  • Cinch Straps adjust cover length by folding the material over itself and keep cover snug
  • 2 Integrated pockets with foldaway arm sleeves for camera and lens control access
  • Hook & Loop bottom closure for tripod, monopod, and manual focus
  • Adjustable rear access with cord lock allows for easy camera access
  • Tape seam sealed
  • NO dedicated eyepiece required
  • Mesh storage and transportation pouch included
  • Hood extension sleeve included for 600mm and 800mm lenses
  • Compatible with LensCoat© lens covers, Hoodie_ lens caps and camera BodyGuards_
  • Made in the USA

Pro model - 30.5" 8.6oz (hood extension for 600mm & 800mm 8" 2.4oz)

Standard model - 20.5" 6.4oz

Care: allow to dry before storing. Clean with water only. Do not machine wash or dry. Do not dry clean.

LensCoat RainCoat from LensCoat on Vimeo.

$137.00
Select Quantity
   Pin it
LensCoat® RainCoat 2 provides protection for your camera and lens from the elements like rain, snow, salt spray, dirt, sand and dust while allowing you easy access to the camera and lens controls. It has all same great features as the original RainCoat but adds an additional integrated pocket with foldaway arm sleeve on the left side for easier access to zoom and focus. The RainCoat 2 comes in two sizes Pro (for DSLRs with lenses from 200-400/300mm 2.8 - 800mm) and Standard (for DSLRs with small lenses up to 100-400/400mm f5.6). The RainCoat 2 is constructed from a lightweight waterproof, breathable poly tricot material. Available in Black, Green, Navy, Realtree® Max4, Realtree AP Snow, Digital Camo, and Forest Green camouflage pattern. The seams are tape sealed for maximum protection.

NO dedicated eyepiece required.

The RainCoat 2 goes on quickly and easily. Its versatility through the use of the cinch straps allows you to adjust the length of the cover and to keep it snug around your lens. It has 2 fold out arm sleeves from its integrated pockets for access to the camera and lens controls. You can also access the camera through the rear opening and the lens through the hook & loop bottom closure.

Features-

  • Lightweight waterproof, breathable poly tricot material
  • Super quiet
  • No slip rubber around hood section for solid grip on hood (no bungee cord)
  • Cinch Straps adjust cover length by folding the material over itself and keep cover snug
  • 2 Integrated pockets with foldaway arm sleeves for camera and lens control access
  • Hook & Loop bottom closure for tripod, monopod, and manual focus
  • Adjustable rear access with cord lock allows for easy camera access
  • Tape seam sealed
  • NO dedicated eyepiece required
  • Mesh storage and transportation pouch included
  • Hood extension sleeve included for 600mm and 800mm lenses
  • Compatible with LensCoat© lens covers, Hoodie_ lens caps and camera BodyGuards_
  • Made in the USA

Pro model - 30.5" 8.6oz (hood extension for 600mm & 800mm 8" 2.4oz)

Standard model - 20.5" 6.4oz

Care: allow to dry before storing. Clean with water only. Do not machine wash or dry. Do not dry clean.

LensCoat RainCoat from LensCoat on Vimeo.

LensCoat® RainCoat 2 Pro Realtree Max4
[lcrc2pm4]
by ELIZABETH FYFE Date Added: Wednesday 18 September, 2013
Excellent quality. A real pleasure to deal with. The lensCoat Raincoat 2 Pro has already on my Nikon lenses It fits perfectly, really well made. 100% manufacture quality. Very easy to fit to the lens. I will most certainly be buying more LensCoats products for my other lens in the very near future. A really big thank you to LensCoat for producing such a superb quality product. I would highly recommend anyone who has an expensive lens/cameras kit to seriously consider purchasing LensCoat products to protect their valuable bit of kit. There are other brands of covers out there but they are no where near as superb or as tremendous quality as the LensCoat make. If you pay for a cheap cover, you will regret it. LensCoats are made to fit perfectly, to protect your camera equipment. I would also recommend online purchase of your LensCoat direct. I ordered my LensCoat on Monday evening and it arrived at 11am today(Wednesday). I live in Scotland, UK. LensCoat I will be ordering more from you very shortly. Thank you for your superb and amazing product...

Rating: 5 of 5 Stars! [5 of 5 Stars!]
by Sal Campos Date Added: Sunday 11 August, 2013
Easy installation and looks good on my Nikon gear.

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Displaying 19 to 20 (of 20 reviews) Result Pages:    1  2  3  4 
Write Review