LensCoat® RainCoat 2 Standard Green

LensCoat® RainCoat 2 Standard Green
[lcrc2sgr]

Availability: In stock

LensCoat® RainCoat 2 provides protection for your camera and lens from the elements like rain, snow, salt spray, dirt, sand and dust while allowing you easy access to the camera and lens controls. It has all same great features as the original RainCoat but adds an additional integrated pocket with foldaway arm sleeve on the left side for easier access to zoom and focus. The RainCoat 2 comes in two sizes Pro (for DSLRs with lenses from 200-400/300mm 2.8 - 800mm) and Standard (for DSLRs with small lenses up to 100-400/400mm f5.6). The RainCoat 2 is constructed from a lightweight waterproof, breathable poly tricot material. Available in Black, Green, Navy, Realtree® Max4, Realtree AP Snow, Digital Camo, and Forest Green camouflage pattern. The seams are tape sealed for maximum protection.

NO dedicated eyepiece required.

The RainCoat 2 goes on quickly and easily. Its versatility through the use of the cinch straps allows you to adjust the length of the cover and to keep it snug around your lens. It has 2 fold out arm sleeves from its integrated pockets for access to the camera and lens controls. You can also access the camera through the rear opening and the lens through the hook & loop bottom closure.

Features-

  • Lightweight waterproof, breathable poly tricot material
  • Super quiet
  • No slip rubber around hood section for solid grip on hood (no bungee cord)
  • Cinch Straps adjust cover length by folding the material over itself and keep cover snug
  • 2 Integrated pockets with foldaway arm sleeves for camera and lens control access
  • Hook & Loop bottom closure for tripod, monopod, and manual focus
  • Adjustable rear access with cord lock allows for easy camera access
  • Tape seam sealed
  • NO dedicated eyepiece required
  • Mesh storage and transportation pouch included
  • Hood extension sleeve included for 600mm and 800mm lenses
  • Compatible with LensCoat© lens covers, Hoodie_ lens caps and camera BodyGuards_
  • Made in the USA

Pro model - 30.5" 8.6oz (hood extension for 600mm & 800mm 8" 2.4oz)

Standard model - 20.5" 6.4oz

Care: allow to dry before storing. Clean with water only. Do not machine wash or dry. Do not dry clean.

LensCoat RainCoat from LensCoat on Vimeo.

$109.25
Select Quantity
   Pin it

LensCoat® RainCoat 2 provides protection for your camera and lens from the elements like rain, snow, salt spray, dirt, sand and dust while allowing you easy access to the camera and lens controls. It has all same great features as the original RainCoat but adds an additional integrated pocket with foldaway arm sleeve on the left side for easier access to zoom and focus. The RainCoat 2 comes in two sizes Pro (for DSLRs with lenses from 200-400/300mm 2.8 - 800mm) and Standard (for DSLRs with small lenses up to 100-400/400mm f5.6). The RainCoat 2 is constructed from a lightweight waterproof, breathable poly tricot material. Available in Black, Green, Navy, Realtree® Max4, Realtree AP Snow, Digital Camo, and Forest Green camouflage pattern. The seams are tape sealed for maximum protection.

NO dedicated eyepiece required.

The RainCoat 2 goes on quickly and easily. Its versatility through the use of the cinch straps allows you to adjust the length of the cover and to keep it snug around your lens. It has 2 fold out arm sleeves from its integrated pockets for access to the camera and lens controls. You can also access the camera through the rear opening and the lens through the hook & loop bottom closure.

Features-

  • Lightweight waterproof, breathable poly tricot material
  • Super quiet
  • No slip rubber around hood section for solid grip on hood (no bungee cord)
  • Cinch Straps adjust cover length by folding the material over itself and keep cover snug
  • 2 Integrated pockets with foldaway arm sleeves for camera and lens control access
  • Hook & Loop bottom closure for tripod, monopod, and manual focus
  • Adjustable rear access with cord lock allows for easy camera access
  • Tape seam sealed
  • NO dedicated eyepiece required
  • Mesh storage and transportation pouch included
  • Hood extension sleeve included for 600mm and 800mm lenses
  • Compatible with LensCoat© lens covers, Hoodie_ lens caps and camera BodyGuards_
  • Made in the USA

Pro model - 30.5" 8.6oz (hood extension for 600mm & 800mm 8" 2.4oz)

Standard model - 20.5" 6.4oz

Care: allow to dry before storing. Clean with water only. Do not machine wash or dry. Do not dry clean.

LensCoat RainCoat from LensCoat on Vimeo.

LensCoat® RainCoat 2 Standard Green
[lcrc2sgr]
by Marsel van Oosten Date Added: Tuesday 24 February, 2015
I have used many different rain covers, and most of them are either extremely bulky, very expensive, or just really difficult to put on. The RainCoat may not be the most compact of them all, it is by far the most well designed. Great quality at a good price. The sleeves are particularly nice. I have used this product in heavy downpour in Africa and blizzards in Iceland, and it works flawlessly. Highly recommended...

Rating: 5 of 5 Stars! [5 of 5 Stars!]
by Peter Krone Date Added: Wednesday 23 April, 2014
This appears to be a good product and I am pleased that I purchased it and I would recommend your products to others...

Rating: 4 of 5 Stars! [4 of 5 Stars!]
by Philip Griffin Date Added: Tuesday 11 February, 2014
Great idea, well put together. Looking forward to giving it some real world useage!

Rating: 5 of 5 Stars! [5 of 5 Stars!]
by Michael Turcotte Date Added: Monday 12 August, 2013
Great product! I would recommend this product as it is exactly as viewed on the website - very well made, easy to put on the camera and easy to operate the camera...

Rating: 5 of 5 Stars! [5 of 5 Stars!]
Displaying 7 to 10 (of 10 reviews) Result Pages:    1  2 
Write Review